Bell harness with back pack

A recovery harness designed for the comfort and safety of divers. This harness can be utilised for work safety. Due to its design, it is an essential piece of kit to assist in rescue if a diver were to fall unconscious or incapacitated. Fully tested multiple lift points ensure a recovery hoist could be safely attached to this commercial harness.

• Can lift an unconscious diver from the water
• Does not need to be removed with any diving gear attached to it in a situation of emergency.
• Has lifting points located on the back and front.
• Can withstand a tensile force of 1000kg.
• Showed no tearing or indication of failure when subjected to a tensile force of 1000kg for 5 minutes in a direction of lift on each lifting point
• Passed a sea water resistance test. This test means it was submerged for 8 hours in seawater and then, without being cleaned in fresh water, left in air for 16 hours with a relative humidity of no more than 75%, all at a temperature of between 15°C - 25°C. This cycle is completed four times for the test

Download Cert

Download more info

Download EU Declaration of Conformity